Remove unneeded logs #2022
Merged
Remove unneeded logs #2022
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
|
I'd keep #1996 - not breaking, but still a visible change (that actually should enable something new), so it might be interesting? |
MabezDev
force-pushed
the
changelog-fixes
branch
from
601f6a6
to
40fe143
Compare
bugadani
approved these changes
Aug 28, 2024
SergioGasquez
added a commit
to SergioGasquez/esp-hal
that referenced
this pull request
Sep 9, 2024
* Add self-testing mode for `TWAI` peripheral. (esp-rs#1929) * Add self-testing mode for `TWAI` peripheral * changelog entry * fix docs build * fix async example * Restore example to original state fix comment * `NoAck` -> `SelfTest` * DMA: Don't require implementors of Read/WriteBuffer to be Sealed (esp-rs#1921) * DMA: Don't require implementors of Read/WriteBuffer to be Sealed * CHANGELOG * mark dma::ReadBuffer and dma::WriteBuffer traits unsafe * Reset peripherals on driver construction (where missing) (esp-rs#1893) * Reset peripherals on driver contruction (where missing) * Don't enable and reset SHA in HMAC ctor * changelog * Don't reset the TIMG0 * Deny missing docs at the package level, adding exceptions for relevant modules (esp-rs#1931) * Fix an infinite loop in interrupt executors (esp-rs#1936) * Add failing test Fix the name of the test fn * Fix interrupt executor looping * Fix formatting * Fix changelog reference * Move changelog to the right crate * Remove dead code * Fix `i2c` + get rid of unused constants/enums (esp-rs#1940) * Slightly clean up embassy HIL tests (esp-rs#1937) * Implemented queue_msg_waiting. (esp-rs#1925) * Implemented queue_msg_waiting. * Fmt. * Adjusted changelog. * Fixed CI. * Fixed pointer mutability. * Update to latest release (`0.6.0`) for `embassy-executor` in `esp-embassy-hal` (fixes esp-rs#1941) (esp-rs#1942) * Updated to latest release (`0.6.0`) for `embassy-executor` * update changelog * update hil-test version of embassy-executor to 0.6.0 * update embassy-executor in `examples` * reflect esp_hal change in `OneShotTimer` to not have a lifetime. * update changelog * revert OneShotTimer changes * ESP32C6: Make `ADC` usable after `TRNG` deinitialization (esp-rs#1945) * Make `ADC` usable after `TRNG` deinicialization (esp32c6) * Changelog entry * Adding `TWAI` HIL test (esp-rs#1946) * Adding `TWAI` HIL test * add `Frame` trait * mutability * Update probe-rs, prebuild xtask for HIL tests (esp-rs#1939) * Update probe-rs * Differentiate jobs * Explicitly print that probe-rs's execution failed * Do not capture stdin/stderr * Pre-build xtask binary * Use current_directory * Print more info when a file can't be read * Do not erase flash after a failure * get_time: fail faster * Make xtask runnable * Removing raw addresses manipulations - part 3 (esp-rs#1892) * WIP state * More fixes * Roll back `esp-storage` changes * Small fixes Will not work, needs another patch for PACs * update pacs dep * Lint * Get rid of unnecessary if-else fix * New pacs version * make contribution docs more visible (esp-rs#1947) * Clean up i2s_async test, add option to repeat (esp-rs#1951) * Simplify I2S async test * Allow running tests repeatedly * Fail at the first mismatch * Clean up * Further clean up timers/executors test (esp-rs#1953) * Further clean up embassy_timers_executors * Do not delay for so long * Print timer values on assert failure * Clean up some more * Retry test a few times to counteract probe-rs halting us * Fix formatting * Fix GPIO Touch pin I/O (esp-rs#1956) * Do not reset `UsbSerialJtag` peripheral (esp-rs#1961) * Fix typos * Add a function to detect debugger connection * Do not reset USB peripheral * Changelog * Fix different register names * Reuse xtensa_lx::is_debugger_attached * Improve SYSTIMER API (esp-rs#1871) * Improve SYSTIMER API * Remove config object * fix things * Allow erasure of unit and comparator numbers * Merge fail --------- Co-authored-by: Dominic Fischer <git@dominicfischer.me> * Simplify initialization APIs (esp-rs#1957) * Accept more types in embassy::init * Apply the same treatment to esp-wifi * Changelog * Clean up * Add doc examples * Fix Alarm generic parameters * Some xtask/metadata cleanups (esp-rs#1965) * Clean up almost all clippy violations * Remove redundant variable from context * Do not clone configs * Do not collect all config symbols into a vec needlessly * Do not allocate so many strings * Implement Sniffer API (esp-rs#1935) * Implemented queue_msg_waiting. * Fmt. * Adjusted changelog. * Fixed CI. * Fixed pointer mutability. * Implemented experimental sniffer api. * Fixed CI.. * Added safety comment. * Featured gated, PromiscuousPkt * Format. * Adjusted imports. * Added injection example. * Made RxControlInfo::from_raw public. * Format. * Added sniffer example. * Add more SPI DMA (full-duplex) HIL tests (blocking and async) (esp-rs#1952) * Add more SPI DMA HIL tests (blocking and async) * move test repetitions into loops instead, add a description about why PCNT is used, import embedded_hal_async::spi * clean up * Add basic HIL test for GPIO that can be configured as pin for (esp-rs#1963) * Patch typo in debug assist register name and used patched esp-pacs (esp-rs#1968) * Disable RTT polling in HIL tests by default (esp-rs#1960) * Disable defmt-rtt by default * Update i2s test based on changes done to async * fmt * Update readme * Update more tests * Refactor SHA to use trait. Implement Digest traits for SHA (esp-rs#1908) * feat(SHA): Refactor SHA to use trait. Implement Digest traits for SHA * Fix CI. Fix wrong sha mode for esp32 * Save hash register for interleaving operation An example (wip) `sha_fuzz.rs` was added to test different functionalities of the SHA driver and to ensure proper functionning under all cases. * Use random data when testing SHA * fix(SHA): Buffer words until a full block before writing to memory This fixes interleaving operations by buffering words into the SHA context until a full block can be processed. * Fix(SHA): Use correct length padding for SHA384 and SHA512. - This fixes a long running issue with SHA384 and SHA512, where some digest of specific sizes wouldn't compute correctly, by changing the padding length of the size field. * Re-export digest for convenience * Remove completed TODO * Remove SHA peripheral requirement. - Document safety of the SHA driver. --------- Co-authored-by: Scott Mabin <scott@mabez.dev> * Fix 1GB elfs (esp-rs#1962) * [3/3] DMA Move API: Introduce DMA buffer objects (esp-rs#1856) * [3/3] DMA Move API: Introduce DMA buffer objects * Remove FlashSafeDma * Add async HIL test * Handle set_length(0) correctly * Fix tx/rx booleans * Unlucky * Preserve previous blocking semantics * Add delay between starting DMA TX and SPI driver * Update CHANGELOG * merge tidy * Add with_buffers builder --------- Co-authored-by: Dominic Fischer <git@dominicfischer.me> * Run HIL tests as part of PR checks (esp-rs#1959) * Run HIL tests as part of PR checks * Cancel pending HIL runs * Only run for ready PRs * Remove `free(self)` in HMAC which goes against esp-hal API guidelines (esp-rs#1972) * Remove `free(self)` which goes against esp-hal API guidelines * changelog * correct changelog sections (esp-rs#1974) * Remove redundant WithDmaSpi traits (esp-rs#1975) Co-authored-by: Dominic Fischer <git@dominicfischer.me> * Fix S2 systimers (esp-rs#1979) * Add basic systimer interrupt tests * Remove unnecessary condition * Fix edge interrupt bitmasks * Modify target_conf in critical section * Remove unnecessary fn call * Fix test * Add failing test case * Fix S2 systimer interrupts being fired unexpectedly * Add changelog entry * Format * Fix C2 delays (esp-rs#1981) * Re-enable delay tests on S2 and C2 * Systimer: use fn instead of constant to retrieve tick freq * Reformulate delay using current_time * Take actual XTAL into account * Re-enable tests * Fix changelog * Disable defmt * Remove unused esp32 code * Update esp-hal/src/delay.rs Co-authored-by: Jesse Braham <jessebraham@users.noreply.github.com> --------- Co-authored-by: Jesse Braham <jessebraham@users.noreply.github.com> * Get rid of `missing docs` in a number of modules (esp-rs#1967) * Get rid of missing docs in a number of modules * address reviews * Address the rest of reviews * remove all remaining `allows` * are you serious? * Add tests to ensure that we don't reset current_time drivers (esp-rs#1978) * tell cargo about all our custom cfgs (esp-rs#1988) * tell cargo about all our custom lints * fixup the unexpected cfg lints, including remove clic * HIL: Multiple featuresets & conditionally enable generic-queue feature (esp-rs#1989) * Conditionally enable generic-queue feature * Allow specifying multiple feature sets and run all of them * parl_io: use ReadBuffer/WriteBuffer for async DMA (esp-rs#1996) * parl_io: use ReadBuffer/WriteBuffer for async DMA * CHANGELOG * Use uhubctl to disable and enable usb ports (esp-rs#1997) * Remove files after test (esp-rs#1993) * Refactor SPI tests & re-enable S3 and some S2 (esp-rs#1990) * Deduplicate spi_full_duplex_dma_async * Refactor SPI tests * Separate out PCNT tests * Re-enable test on S3 * Re-enable some S2 tests * gpio: Make AnyPin, AnyInputOnlyPin, DummyPin available from gpio module (esp-rs#1918) Making these available straight from `gpio` aligns it with other Embassy implementations (mainly nrf and stm32). Signed-off-by: Priit Laes <plaes@plaes.org> * Clean up SHA, RSA, mandate `#[must_use]` on Futures (esp-rs#2000) * Janitor go brr * Clean up SHA * Use max CPU speed * RSA cleanup part 1 * Clean up nonsense comments * Mark all futures as must_use * Prefer `cfg_if` (esp-rs#2003) * SPI DMA: use `State` for both blocking and async operations (esp-rs#1985) * use `State` for both blocking and async operations, remove async version of SpiDmaBus in favour of being generic over the mode * reuse wait_for_idle more * changelog * rename generic params for consistency * Add duplex mode to SpiDmaBus * implement HalfDuplexReadWrite for SpiDmaBus * Docs on new async APIs * Limit half duplex transfers to the capacity of the DmaBuf * docs * rebase tests * address review comments * remove duplex traits from spi * fix tests * spi docs rejig * s/InUse/TemporarilyRemoved/g * Re-add feature gate for software_interrupt3 (esp-rs#2011) * Fix (esp-rs#2013) * Implement timer conversion for some arrays (esp-rs#2012) * Test and fix async RSA (esp-rs#2002) * RSA cleanup & API consistency change, part 2 * RSA cleanup & API consistency change, part 3 * Add async tests * Fix async for ESP32 * Merge impl blocks * Backtrack on some mutability changes * Use Acquire/Release ordering * Fwd to write_multi_start instead of duplicating impl * Only reserve the interrupt when executors are needed (esp-rs#2014) * forward spi methods to SpiDmaBus (esp-rs#2016) * forward spi methods to SpiDmaBus * changelog * Fix defmt compatibility (esp-rs#2017) * Fix defmt compatibility * Update tests to cover macros * Remove unneeded logs (esp-rs#2022) * HIL: Don't skip cleanup (esp-rs#2024) * Don't skip cleanup * Make sure the power is off for a short while * Use newly published versions of all PACs in `esp-hal` (esp-rs#2025) * Use newly published versions of all PACs in `esp-hal` * Address additional review comments * Version 0.20.0 (esp-rs#2038) * Update package dependencies and bump version numbers * Update `CHANGELOG.md` for each package to be published * Remember to update `xtensa-lx-rt` too :) * Add and use TrapFrame::new() in esp-wifi * Bump `xtensa-lx-rt` by minor instead of patch, as there are breaking changes --------- Co-authored-by: Dániel Buga <bugadani@gmail.com> * Fix before_snippet failing in release (esp-rs#2040) * Fix before_snippet failing in release * Fix esp-hal-embassy comment * Prepare v0.20.1 release (esp-rs#2046) * Try to be more helpful (esp-rs#2044) * Begin next release cycle (esp-rs#2039) Co-authored-by: Scott Mabin <scott@mabez.dev> * fix: Fix nightly errors (esp-rs#1934) * Disable object's unnecessary features in proc macro that loads LP code (esp-rs#2018) * Disable object/decompress * Only enable elf support in object * Random cleanups in non-checked packages (esp-rs#2034) * Deduplicate feature check macros * Re-enable rust-analyzer for most of the workspace * Cargo fix * Turn off defmt * Only build xtask * Clippy pls * Fix CI * Fix paths * Always create doc directory first * Revert r-a * Update esp-hal-procmacros/src/lp_core.rs Co-authored-by: Dominic Fischer <14130965+Dominaezzz@users.noreply.github.com> --------- Co-authored-by: Dominic Fischer <14130965+Dominaezzz@users.noreply.github.com> * QSPI tests (esp-rs#2015) * Add QSPI tests * Simplify * Add qspi_write_read test * Clean up gigantic GPIO eyesore (esp-rs#2048) * Save/restore coprocessor state on stack (esp-rs#2057) * Whitespace * Save and restore coprocessor enable state * release prep xtensa-lx-rt@0.17.1 (esp-rs#2060) * Protect SYSTIMER/TIMG shared registers (esp-rs#2051) * Protect SYSTIMER/TIMG shared registers * some review comments * more review comments * more review comments * bring back portable_atomic --------- Co-authored-by: Dominic Fischer <git@dominicfischer.me> * automatically apply status:needs-attention to new esp-hal issues (esp-rs#2030) * Improve CP0-disabled error message (esp-rs#2061) * Improve CP0-disabled error message * CHANGELOG.md * Rework hal initialization (esp-rs#1970) * Rework hal initialization * Turn sw interrupt control into a virtual peripheral * Return a tuple instead of a named struct * Fix docs * Remove SystemClockControl * Move software interrupts under interrupt * Re-document what's left in system * Update time docs * Update sw int docs * Introduce Config * Fix tests * Remove redundant inits * Doc * Clean up examples&tests * Update tests * Add changelog entry * Start migration guide * Restore some convenience-imports * Remove Config from prelude * Fix hil-test xtask instruction (esp-rs#2062) * Fix hil-test xtask instruction * Fix another mention * [esp-metadata] Make clap dependency optional (esp-rs#2055) * Provide ehal impls for DummyPin (esp-rs#2019) Co-authored-by: Scott Mabin <scott@mabez.dev> * storage: Clean up ROM function declarations (esp-rs#2058) * Clean up external function declarations * Tweak syntax * Fix various SPI/DMA issues (esp-rs#2065) * Add failing test * Fix enabled interrupt * Fix using the correct waker * Changelog * Enable test on more devices that have SPI3 * WPA2 ENTERPRISE (esp-rs#2004) * WPA2 ENTERPRISE * Defmt, Clippy, Changelog * Defmt, again * Clippy, again * Mention corresponding JIRA ticket * Rename * fmt * Use Mutex in scheduler * Adapt wifi_delete_queue * Adapt log level * Bump to esp-wifi 0.9.0 (esp-rs#2066) * Remove NoPinType (esp-rs#2068) * Make esp-wifi build on stable, again. Bump to 0.9.1 (esp-rs#2067) * Make esp-wifi build on stable, again. Bump to 0.9.1 * CHANGELOG.md * MSRV check esp-wifi * ESP32-S2 doesn't support Bluetooth * Remove lazy_static in favor of OnceLock (esp-rs#2063) * [esp-metadata] Remove lazy_static in favor of OnceLock * [esp-wifishark] Remove lazy_static in favor of normal initialisation * [ieee802154-sniffer] Shorten SelectorConfig initialisation * [ieee802154-sniffer] Remove lazy_static in favor of normal initialisation * Remove most trait implementation features from `esp-hal` (esp-rs#2070) * Eliminate esp-hal's `ufmt` feature * Eliminate esp-hal's `embedded-hal-02` feature * Eliminate esp-hal's `embedded-hal` feature * Eliminate esp-hal's `embedded-io` feature * Eliminate esp-hal's `async` feature * Update `CHANGELOG.md` * Remove `async` from required features for HIL tests * Update migration guide * Adding `I2C` HIL test (esp-rs#2023) * i2c hil test * pin * fmt * Test * WIP (gpio test left) * Finalize the CODE part (to be cleaned up) fmt * Smaller cleanup * cleanup * rebase * fix * getting last chips ready * Addressing reviews * Remove Gpio type aliasses (esp-rs#2073) * Remove Gpio type aliasses * Clean up examples * Remove the need to manually pass clocks around (esp-rs#1999) * Clean up passing clocks to drivers * Update changelog * Initialise Clocks in a critical section * Fix calling now() before init * Fix doc * Fix esp-wifi migration guide * Add safety comment * Update tests * Remove gpio dispatch macro-defining proc macro (esp-rs#2069) * Keep a single PinType trait * Merge impl blocks * Deduplicate usb pad workaround * Deduplicate some bit manipulation * Remove gpio dispatch proc macro * Inline PinType into GpioProperties * Remove AnyInputOnlyPin (esp-rs#2071) * Remove AnyInputOnlyPin * Add section to migration guide * Remove unnecessary enum Co-authored-by: Dominic Fischer <14130965+Dominaezzz@users.noreply.github.com> --------- Co-authored-by: Dominic Fischer <14130965+Dominaezzz@users.noreply.github.com> Co-authored-by: Jesse Braham <jessebraham@users.noreply.github.com> * Accept ErasedPin in AnyPin (esp-rs#2072) Co-authored-by: Jesse Braham <jessebraham@users.noreply.github.com> * fix issue handler, don't rebuild on main the merge queue checks this for us (esp-rs#2077) * Fix nightly warnings (esp-rs#2082) * Build examples in debug mode (esp-rs#2078) * Build examples in debug mode * Allow building psram examples in debug mode in CI * Don't rebuild tests, try to avoid rebuilding dependencies * Improve SHA driver API (esp-rs#2049) Co-authored-by: Dominic Fischer <git@dominicfischer.me> * [esp-hal-procmacros] Update to proc-macro-error2 (esp-rs#2090) * lcd_cam: fix wrong buffer length used if 16bit and len<=8192 (esp-rs#2085) * lcd_cam: fix wrong buffer length used if 16bit and len<=8192 * changelog * Implement sleep and wakeup functionalities for ESP32C2 esp-rs#1920 (esp-rs#1922) * i2c: fix embedded-hal transactions (esp-rs#2028) * i2c: fix embedded-hal transactions * changelog+fmt * small naming cleanup * i2c: fix 1 byte reads * typo * small cleanup and add a few internal docs * update changelog * rebase & CHANGELOG * extract next op conversion * fix `setup_read()` logic for 0 length reads. * return error for 0 length reads and 0 length writes where start=false * comment about max_len in setup_write() * filter out 0 length read operations in `transaction()` * Short circuit for problematic 0 lengths in read_operation and write_operation * don't short circuit a 0 length write operation if stop=true * handle write_read when the read bufer is empty * Optionally type-erased GPIO drivers (esp-rs#2075) * Remove type erased gpio structs * Implement Peripheral for ErasedPin * Simpler type erasing, accept ErasedPin in pin drivers, remove type erased drivers * Reformulate pin drivers using Flex * Erase gpio types by default * Accept any pin in AnyPin * Add changelog and migration guide * Fix tests and examples * Undo rename of clone_unchecked * Rename `esp_hal::time::current_time` to `esp_hal::time::now` (esp-rs#2091) * rename esp_hal::time::current_time to esp_hal::time::uptime * changelog * move more things to init * s/uptime/now/g * Add missing #[doc(hidden)] in xtensa-lx-rt-proc-macros (esp-rs#2097) * Enable ESP32 HIL (esp-rs#1977) * Enable ESP32 HIL * RMT fixed * SPI DMA partially works, _pcnt tests not working * bckup * finish * readme and cleanup * rebase + cleanup * RMT S2 pin typo + clean forgotten comments * review comments * update 10000 * indentation * replace cfg gate with cfg_if * esp-wifi: other crates also provide `strchr` (littlefs2-sys) (esp-rs#2096) * esp-wifi: other crates also provide strchr (littlefs2-sys) * esp-wifi: other crates also provide strchr (littlefs2-sys) * changelog * fmt :-( * Reordered RX-TX pairs to be consistent (esp-rs#2074) * feat: Update rx-tx order in i2s * feat: Update rx-tx order in dma macros * feat: Update rx-tx order in spi * feat: Update rx-tx order in aes * feat: Update rx-tx order in mem2mem * feat: Update rx-tx order in twai and split methods * feat: Update rx-tx order in twai * feat: Update rx-tx order in twai and uart docs * docs: Add sentence about order * docs: Update changelog * feat: Update rx-tx order in embassy_interrupt_spi_dma tests * style: Rustfmt * docs: Migrating guide * fix: Typo Co-authored-by: Dániel Buga <bugadani@gmail.com> * fix: Diff Co-authored-by: Dániel Buga <bugadani@gmail.com> * fix: Tests rx-tx order * fix: Update new_with_default_pins order * feat: Update rx/tx order in hil_test::common_test_pins! * feat: Update dma_extmem2mem example * fix: Revert deleted input arg * style: rustfmt * feat: Disable test_asymmetric_dma_transfer for S2 --------- Co-authored-by: Dániel Buga <bugadani@gmail.com> * Random additional GPIO cleanups, implement Peripheral for drivers (esp-rs#2094) * Reuse enable_iomux_clk_gate * Remove public functions * Remove set_to_input * Deduplicate constructor * Deduplicate is_listening * Hide PinFuture better * Deduplicate set_int_enable * Align macro indentation * Typo * Slightly simplify the touch_into macro * Implement the AnalogPin trait directly * Provide default impls for simple forwarding methods * Newtype ErasedPin * Merge rtc_pin macros * Fmt * Changelog * Fix migration guide * Fix example * Fix ETM * Make additional memory available as `dram2_uninit` (esp-rs#2079) * Make additional memory available as `dram2_uninit` * CHANGELOG.md * Update esp-println version in usage section (esp-rs#2100) * Add integration with bt-hci crate (esp-rs#1971) * Add integration with bt-hci crate Implementing traits from bt-hci allows the BleConnector to be used with the Trouble BLE stack. * use packed based read interface * Improve example to allow another connection after disconnect * update trouble version * Workaround for spurious command complete events * fix formatting * ignore notify errors in example * fix clippy warnings * remove async feature from hal dependency * remove deprecated feature from example * Adopt to api changes * Api fix for esp32 * Set rust-version of esp-wifi * bump MSRV to 1.77 for CI and esp-hal * Add changelog entry * ensure that clock init happens after rtc domain is initialized (esp-rs#2104) * Prepare esp-backtrace 0.14.1 (esp-rs#2107) * esp-wifi uses global allocator, esp-alloc supports multiple regions (esp-rs#2099) * esp-wifi uses global allocator, esp-alloc supports multiple regions * CHANGELOG.md * Apply suggestions * Use `alloc` when linting esp-wifi * Make coex example build for ESP32 * Re-enable some wifi examples for ESP32-S2 * Optionally depend on `esp-alloc` (by default) * Rename INSTANCE -> HEAP * feat: Add issue templates --------- Signed-off-by: Priit Laes <plaes@plaes.org> Co-authored-by: Kirill Mikhailov <62840029+playfulFence@users.noreply.github.com> Co-authored-by: liebman <liebman@zod.com> Co-authored-by: Juraj Sadel <juraj.sadel@espressif.com> Co-authored-by: Jesse Braham <jessebraham@users.noreply.github.com> Co-authored-by: Dániel Buga <bugadani@gmail.com> Co-authored-by: Frostie314159 <frostie.neuenhausen@gmail.com> Co-authored-by: Sycrosity <72102935+Sycrosity@users.noreply.github.com> Co-authored-by: Scott Mabin <scott@mabez.dev> Co-authored-by: Fan Jiang <ProfFan@users.noreply.github.com> Co-authored-by: Dominic Fischer <14130965+Dominaezzz@users.noreply.github.com> Co-authored-by: Dominic Fischer <git@dominicfischer.me> Co-authored-by: Anthony Grondin <104731965+AnthonyGrondin@users.noreply.github.com> Co-authored-by: Priit Laes <plaes@plaes.org> Co-authored-by: Björn Quentin <bjoernQ@users.noreply.github.com> Co-authored-by: Gnome! <david2005thomas@Gmail.com> Co-authored-by: M4tsuri <me@m4tsuri.com> Co-authored-by: Szybet <53944559+Szybet@users.noreply.github.com> Co-authored-by: Ulf Lilleengen <ulf.lilleengen@gmail.com>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Thank you for your contribution!
We appreciate the time and effort you've put into this pull request.
To help us review it efficiently, please ensure you've gone through the following checklist:
Submission Checklist 📝
cargo xtask fmt-packagescommand to ensure that all changed code is formatted correctly.CHANGELOG.mdin the proper section.Extra:
Pull Request Details 📖
#1837's entry is no longer true, therefore I removed it. I don't believe #1996 is a breaking change as the
ReadBufferandWriteBuffertraits have impls for slices.